CrossBow Tension Bicycle Concepts by Clandestine Design Group

If you are a fan of Buckminster Fuller, you are no doubt familiar with the principle of Tensegrity (or  tensional integrity), which is “based on the use of isolated components in compression inside a net of continuous tension, in such a way that the compressed members (usually bars or struts) do not touch each other and the prestressed tensioned members (usually cables or tendons) delineate the system spatially.”

I have mentioned Tensegrity bicycles in the past, and any discussion of bike frame designs with tensioned cables reminds me of the Slingshot designs of the 80’s and 90’s. The basic idea goes back many years before that though (as you will see at the end of this post).

CrossBow tension bicycle concept by Clandestine Design GroupRecently, the folks at Clandestine Design Group, an Australian product design firm, came up with a couple of new designs for a tension bicycle that they call the CrossBow. The idea came from Brisbane’s  new Kulripa Bridge. “The Clandestine crew where inspired by its architectural use of construction elements in tension rather than compression.”

 CrossBow tension electric bicycle concept by Clandestine Design Group

Neil Davidson, Clandestine Design Director, explains the impromptu project further:

“Always looking for new ways to design things with wheels we immediately wondered if bicycle frames had ever explored this concept. We thought that advances in composite fibre and fibre filaments could create road bike frames that would be feather light and structurally strong.  

Research shed light on two things, the first was that modern composite filaments millimeters in diameter are cable of holding tones of mass in tension and the second is that if a one human can think of it, then so can another – we found out that the concept is not new. Check out the dapper looking gent from the 1920’s and his tension suspension frame.

Regardless and still inspired we put stylus to screen and sketched out two great looking mens’ road bike frames that use the concept of carbon fibre frames held in tension by filament wire or cable. For now we are running with the internal project name of Crossbow. You will note the second sketch explores a electric assist crank set hub drive concept.”
 
wire-frame-Bicycle-and-bridge

 


 
Subscribe to the email newsletter… and follow Bicycle Design on Facebook , Twitter , Pinterest , and Google + .

Comments

4 responses to “CrossBow Tension Bicycle Concepts by Clandestine Design Group”

  1. Pau Avatar
    Pau

    Errr…
    At the risk of sounding harsh, I don’t see what is new in the first frame: they just took the old concept and added trendy “stealth” lines.
    And the second drawing is not really interesting either: they just replaced replaced a regular bike’s top tube by a cable, which I don’ t think makes much sense structurally, because the top tube doesn’t only work in tension (I would even say it mainly works in compression.)
    I’m no expert, but I would say tensegrity doesn’t work well for bikes frames, because you don’t have space laterally.

  2. 54 Avatar
    54

    What’s with the blackish background…kind of make it hard to see the wire…. the wire is like one of the worst aerodynamic shape you can imagine, it’ll be a tough sale for the marketing dept for a road bike.

  3. Simon Avatar
    Simon

    Well i do like the design. And the blackish background looks badass.

  4. se-po Avatar
    se-po

    Wouldn’t a wire be dangerous in case I fall down?

Leave a Reply

Your email address will not be published. Required fields are marked *