Tag: reader submitted design
-
A Leitra velomobile redesign by Kuba Szankowski
For his final project in Mechanical Engineering at the Danish Technical University, Israeli born Danish citizen Kuba Szankowski designed a velomobile based on the classic Leitra design. He worked closely on the project with Carl Georg Rasmussen of Leitra, who “at eighty years young still builds and maintains all the velomobiles, as well as most any…
-
Velox Volcane, a home-built carbon and aluminum bike by Richard Machin
Back in the mid nineties, I remember being completely fascinated with Damon Rinard’s “How I Made a Carbon Fiber Bike in My Garage” article (20+ years later, you should still check out the archive of his old Tech Pages if you never saw them, and read a recent interview with Rinard at Slowtwitch). I…
-
Guidelines for submitting a design
Reader submitted designs and tips are always welcome and encouraged here, but often I do get focused on my own design projects and fall behind on the emails sent to tips@bicycledesign.net. The volume of (often off-topic) messages from companies and PR firms has increased dramatically in recent years, so occasionally really good designs from readers…
-
Harvolt Bike Share System by Matthew Harding
Matthew Harding recently completed his degree in Industrial Design at Monash University in Melbourne, Australia. For his final project, Harding designed an Electric Bike Share System, which he describes below: “My initial goal of the project was to encourage cycling in Melbourne, which is very much a car dominant city. I wanted to design the…
-
A catch-up post with several designs
I have been running a bit behind this blog lately, but there are many interesting design submissions from readers in my inbox (thanks to all of you who have sent in tips or designs). I will be in Miami for Maison & Objet Americas the rest of this week and won’t likely have time to…
-
Predator HPV by Eugen Ackermann
Last summer, for his Bachelor thesis of Industrial Design at Pforzheim University in Germany, Eugen Ackermann chose to design an “Alternative Mobility” solution. His Predator design is a recumbent bike, a category that he believes offers users many advantages but still is not socially accepted even though the basic design goes back to the…
-
ElevenTwentySeven Erembald by Tobias Knockaert
Tobias Knockaert is a recent industrial design graduate from Belgium, Bruges. For his final school project, he designed a custom bicycle frameset using laser cutting technology to precisely size and miter the frame tubes. Since people were generally enthusiastic about his prototype, after graduation Tobias decided to start a company with business partner Karel…
-
Kaylad-e: an electric trike concept by Dimitris Niavis
Every once and a while, I get busy with work and other projects and allow a really great design submission to fall through the cracks. Greek industrial designer Dimitris Niavis’ Kaylad-e concept is a perfect example of that. Niavis sent me a message about his e-trike project about a month ago, but I somehow overlooked…
-
E-bike Element by Olivier Murro
The Element is a 250 watt e-bike designed by Olivier Murro for Wipe2. The bike features a Daum electric pedelec motor, a unisex frame made from two stamped aluminum surfaces, and a removable battery case. LED lights are integrated into the battery pack section of the downtube for increased visibility. A few images and variations…
-
Transport commuter bike by David Hotard, Matthew Campbell, and Edwin Collier
A few years ago, Kevin Shankwiler, an Industrial Design Professor at Georgia Tech, contacted me about a bicycle design class that he was planning to teach. I put him in touch with a couple of the designers at SRAM, and they were happy to support the project by sharing their expertise as designers in the…
-
Nested urban e-trike by Natacha Lesty
It’s been just over two months since I last posted here, and I am finally ready to get back to it. There are likely to be a few minor changes in the way I treat the blog going forward, but I won’t go into that today. Instead, I want to pass along a concept bike…
-
A handcycle mountain trike and a couple of student designs
I have been behind on posts here at Bicycle Design lately, but I want to take a few minutes today to pass along a few designs that were submitted by readers recently. In 2011, I featured the Forzer off-road handcycle by Marius Hjelmervik in a post. Designer Tom Bicher has been working on a similar…
-
E-Trike by George Cooper
George Cooper is a recent Industrial Design graduate from the UK. For his final school project, he set out to design a human powered vehicle geared toward the majority of people who don’t currently cycle (that blue ocean that is mentioned here from time to time). His solution is an electric assist recumbent tricycle with…
-
Revelo LIFEbike by Henry Chong
I mentioned Henry Chong in a 2010 post about electric bikes that were pushing the boundaries of the category, so it is no surprise that his latest e-bike doesn’t look like the ones you see on the market today. Unlike his speed oriented Panasonic e-bike concept, the Revelo LIFEbike (Lightweight, Intelligent, Flexible, Electric bike) is…
-
Wooden bikes, folding helmets, velomobiles and more
I have posted about quite a few wooden bikes before, but this plywood Ash design by French designers Thierry Boltz and Claude Saos is a bit different than most. The WOOD.B design for BSG Bikes has a wooden main triangle which screws to the steel headtube and rear triangle elements. You can see a video…
-
A wind tunnel, lights, S-cargo, old folders and more
A long weekend is coming up (here in the US at least). Before I ditch the computer and hit the pool, I want to pass along a bunch of the interesting links that I have noticed lately. If you have been checking any bike related sites at all in the past couple weeks, you know…
-
Bike designs by Milos Jovanovic
I have seen quite a few bicycle projects on the design portfolio website Behance lately, and I have been saving them into a collection on the site as I find them. Two of the designs that I noticed recently are the ones featured here by Serbian designer Milos Jovanovic. Appropriately named, “Woody” is a wooden…
-
ZIPcycle 2.0 by Eric Birkhauser
Eric Birkhauser’s “open air” ZIPcycle velomobile concept was featured in a Bicycle Design post last year. He points out that the feedback received from readers in the comments (and from an earlier post) directly led to his redesign… the ZIPcycle 2.0. In order to prove the concept, Eric’s next step is to build a working…