VeloTilt: Design of a low drag practical velomobile

Recently, Arnold Ligtvoet from RaptoBike sent me a link to an interesting project that he is involved with. The goal is to develop a velomobile that is both practical and fast, and the team that is working on the VeloTilt certainly has the credentials to make it happen. The development team consists of Will Schermer- the idea and funding guy, David Weilemaker- design and aerodynamics, George-emile Tokaya- design and ergonomics, Bram Smit- FFWD, design and construction, Jan Reus- composites, and Arnold Ligtvoet- commercial development. Wielemaker and Tokaya are both members of the Delft Technical University HPT team and were designers of the Velox2, which reached a speed of 129.6 Km/h (80.1 mph) at Battle Mountain, NV, so a lot of what they learned from that experience is going into this project.

In a presentation during the Velomobile Seminar in Dronten, NL last month, the team pointed out a few issues with current velomobiles:

Not always easy to enter and exit
Fall over when cornering too fast
Limited cargo space
Not easy to maintain
Require a large storage area

They also outlined the design goals for the VeloTilt project:

Tilting for safe cornering and fun to ride
Easy entrance
Usable for people from 1.6 to 2 meter ( roughly 5’ 4” to 6’ 7”)
70 liters of luggage space
Excellent braking
Speed 55km/h with 150 watts of power
All technical parts easily accessible
Storage in .8 x 1 meter space

You can see CAD renderings of the design at its current stage in this blog post, where you will also find all of the presentation slides from Dronton. The front wheel drive tilting trike features 20” side mounting wheels, with dual disc brakes in the back and a drum brake in the front. Risse shocks are used on the rear wheels, and the front is driven by a 3-speed hub and 9-speed derailleur. The overall dimensions are 248 cm long by 76 cm wide by 105 cm tall (roughly 8’ 1” x 2’ 6” x 3’ “5), and the vehicle can be stored upright on its end as seen here.

It is a pretty interesting project, so I look forward to learning more about it as it develops. I will definitely pass along any further info about the project as it comes to me, so stay tuned.

Posted

October 17, 2012

Commuter, Concept

James

Tags:

commuting, HPV / Recumbent, recumbent, velomobile

Comments

31 responses to “VeloTilt: Design of a low drag practical velomobile”

Andy

October 17, 2012

Good to see they are actually identifying places to improve – I wish every project you posted had done that! I wonder what the visibility is like in that. I know on a velomobile, it’s not easy to turn your head, but this does look like a rather tiny window to look through on the sides. While racing velomobiles should be enclosed for the best aerodynamics, a real-world one should be open on top, otherwise you will bake inside.

Standing on end is a good idea in theory, but that image looks like a $5000 cabon fiber frame is balanced on a point, and I’d sure hate for a breeze or bike-tipper to knock it down and ruin the shell.

Reply
1. Impossibly Stupid
  
  October 17, 2012
  
  In there you’ve hit on one big impracticality of all velomobiles that was not on the list: Crazy expensive. I’ll believe this is more than a pipe dream when I see a price that is less than a motorcycle (or car!) would cost.
  
  Reply
  1. Arnold
    
    October 17, 2012
    
    Not saying that velomobiles are cheap, but if you look at the total cost compared to running a car they are affordable at least. Here in the Netherlands we pay tax to get a car on the road, lots of tax when buying the car, high prices for fuel (1.86 euro per liter) and the maintenance and write off on a car are also high. Compare that to the relative high purchase of a VM and low running cost and I’m sure a VM (or bicycle) is cheaper than it looks.
    
    Reply
    1. Andy
      
      October 17, 2012
      
      It’s not that easy in the US. A new velomobile at around $12,000 might be a cost savings compared to a new small hatchback (lets say a Honda Fit at $17,000). But a new commuter bike (typically about $700 would yield a more than sufficient one) does nearly everything that a velomobile can do. Yes, it’s a little slower and is open to weather, but it can still take one rider across many miles, even fully loaded with touring bags full of groceries. It’s also easier to carry, can fit on/in a car/train/plane when needed, and costs a heck of a lot less. That’s why it’s hard to compare these two given the price differences. That is specifically the reason why on a typical nice day out I might see a few dozen cyclists, yet I have never seen a velomobile on the roads. That doesn’t mean I don’t want one, or that they aren’t practical, it just means that the price point is a significantly enormous barrier.
      
      Your designs for an efficient and racy velomobile might yield you a few sales at a high price. But I think what I.S. and I would agree on is that if instead you made a velomobile for $2,500 that fit commuter needs instead of racer needs, you’d likely sell hundreds instead of single digits.
      
      Just my 2 cents.
      
      Reply
      1. Arnold
        
        October 18, 2012
        
        Hi Andy,
        all I can say is : come to the Netherlands. Here if I go out on a sunny day I see a few hundred cyclists, possibly some recumbents and maybe a velomobile or two.
        
        I don’t think it is possible to market a velomobile at 2500 dollar, that offers the same advantages over a regular bicycle that current velomobiles do. Here in the Netherlands they are truly used as replacement for cars. Owning a car (not even riding it) is very expensive and it’s very busy on the roads.
        
        I don’t expect to sell single digits of the VeloTilt 🙂 At the moment I am not so sure that price is the most important factor for people why they are not riding velomobiles en masse. I think it’s more a mindset change, before anything else. True price can help convince people to take that step, but I don’t see that this would make the market 10 times bigger.
        
        Reply
    2. Impossibly Stupid
      
      October 17, 2012
      
      Like Andy says, you just can’t compare a human powered vehicle to a car (or, really, anything with an engine). Just because the total expense of a car is higher, it is not *comparably* higher given the perceived advantages of motor vehicles. It’s not convincing to say, “Yeah, it only seats one person and they have to pedal like mad to get any speed out of it, but it costs just 75% of the thing that weighs 100 times as much and can carry a whole family without any physical effort!”
      
      I also doubt those “maintenance” costs won’t find there way into any serious velomobile usage. Bike trail aren’t designed to have something going super-fast on them, and riding on roads mixed with regular traffic is going to require more than a few concessions to fit in. As much as I would like one, if I could afford it (and, yes, I’d snap it up for even $5K along with probably thousands of others), I have absolutely no idea how a velomobile would fit in the current transportation infrastructure *anywhere* in the world.
      
      Reply
      1. Arnold
        
        October 18, 2012
        
        Hi IS,
        I do think you can compare the two. They offer a similar solution to the problem of getting somewhere. In the Netherlands we already have 3 velomobile manufacturers and a lot of people with experience in riding them. Even on my open bikes people cycle up to 50 km to work (and back in the afternoon).
        
        The maintenance costs are relatively low. Most VM’s have a completely closed chainline, so derailleurs, chains and cassettes tend to have minimal wear. The most important costs are tires and brakes. There are quite a few comparisons between car costs (based on the Dutch situation) and bike costs.
        
        We aim for 55 km/hour at 150 w. 150 watt is something an average person can deliver for around an hour and a sporty person for 4 hours. So not exactly pedaling like a mad man…
        
        I do appreciate your feedback, so keep it up!
        
        Reply
        
        Impossibly Stupid
        
        October 19, 2012
        
        “They offer a similar solution to the problem of getting somewhere.”
        
        Not really; I gave the reasons that, for Americans at least, they’re not that similar. More to the point, it is a solution that is most similar to other recumbent trikes. THAT is the comparison that most people are going to make, and you may indeed compare favorably to that, but I have yet to see a velomobile that didn’t triple the cost of the underlying bike while offering very little speed advantage for most trips done by people who weren’t cranking like mad (and, yes, sustaining a 150W output is a high activity level for any human, regardless of their endurance ability). In fact, I would *love* to see some evidence/study that shows what actual difference there is for people who normally tool around at 20kph (~12mph) when they are put into a velomobile and exert the same effort.
        
        Of course, little of that has to do with the design itself, which I do think is quite nice. I’m just trying to stress that if “practical” is a major bullet point, then you actually have to get practical on how people will view it in relation to the alternatives. The biggest obstacle to velomobiles has always been their price compared to other bikes on the low end and cars on the high end.
Arnold

October 17, 2012

Hi Andy,
thanks for the positive comments. We are looking at designing two different hoods for the bike. One pictured above for fast commutes and racing (with less practicality) and one that will allow you to ride the bike open top. Together with the open top we will have the option to add a hood, so you can ride it closed again, however the total combination will be a little less aero efficient than the racing hood.

There is an update here which addresses some of your questions:
http://wimschermer.blogspot.nl/2012/10/velotilt-update_17.html

Reply
Ron Richings

October 17, 2012

I would be interested in one of these, PROVIDED that it is made large enough to fit a ‘Clydesdale’ rider. 6 ft 2 in and near 300 pounds in my case. Will it accommodate that size of rider?

Reply
Darryl Jordan

October 17, 2012

I”d like to sere more trunk space or towing capability for getting groceries. Also, some consideration should be paid for parking as in bumper guards and securing the trike and insides at bike racks and hitching posts. I’m not worried about the upfront cost as this is not a department store bike for kids.

Reply
Bubba Nicholson

October 18, 2012

The place velomobiles are most frequently damaged is on the nose. A foam front bumbper with 100% recovery sufficient to cushion a dead stop from 30 mph without damage would cost very little. It takes awhile to get the hang of driving one of these. My Quest velomobile (with trailer hitch) rides like a canoe. The outboard wheels, even as these-faired, are a source of drag. The tadpole design out performs single front wheels, although the ability to lean may improve that balance. The added weight may not be worth the trouble.
In traffic, high, bright, LED lights are required with convenient turn signals on the tiller (with a motorcycle switch), a technology sadly lacking on today’s vehicles.

Reply
1. Maarten
  
  November 2, 2012
  
  What are you talking about. There are turn signal LEDs on current velomobiles, in my case a Quest. The switch is conveniently located on the tiller. See http://www.flickr.com/photos/28398992@N04/5459423656/in/set-72157625963638605
  
  Reply
chidd.org » I want one…

October 18, 2012

[…] I do hope they make these things. It would be even cooler than my egg. Although it might be even sweatier than the current design. Checkout their website. […]

Reply
art

October 22, 2012

Nice design overall, but the unsupported rear trailing arms are going to come apart on the first corner. I would also like to know exactly how you think that suspension design is going to allow the vehicle to tilt.

Reply
1. Arnold
  
  October 22, 2012
  
  Art,
  thanks for the compliment (I think). Please do not dismiss this project as another one of those renders. The team behind this consists of two current recumbent manufacturers. Most everyone in the team has a lot of cycling experience. The design of the VeloTilt is based on : https://www.youtube.com/watch?v=3JSTqIOORgI
  
  Reply
Peter

October 23, 2012

How about a used Velocity Velo velomobile with ~600 miles on it for $5200? It was $7200 new with 22 speed internal gearing and etc, etc. See: http://www.sale.bicycleman.com, email pete@bicycleman.com

Reply
mgb

November 6, 2012

Hi there,

I liked the Munzo TT design very much and would love to see your design in production and eventually for sale, but price is a valid consideration for many, especially those who don’t earn European salaries. The rear wheel tilt mechanism reminds me of the Nissan tilting concept electric car “LandGlider” http://www.youtube.com/watch?feature=player_embedded&v=dFLKhvdzJec

BTW, since you are Dutch, do you know what happened to the Drymer (semi-upright, mostly covered tilting tadpole trike with elec. assist)? http://www.youtube.com/watch?v=bRxJXkw5aLs Not much was ever available on that project in English though it has been around for at least 5 years now.

Cheers, and all the best.

Reply
1. Arnold
  
  November 7, 2012
  
  Hi mgb,
  
  thanks for the Nissan link. At the moment we are mainly looking at technical feasibility of the bike. It obviously can exist in CAD, but what happens when we take one to the roads. How will it perform in windy conditions, will we achieve the speed potential, and so on. We are looking at pricing as well in terms of design choices versus manufacturing costs, but only on a limited scale at the moment.
  
  On Drymer: Last thing I heard is that the company was bought by one of the suppliers. This was in 2011. In June of this year apparently it was introduced. No news after that. This project has been around under various names and owners for a long time indeed.
  
  Reply
stevbike

November 22, 2012

I test rode a Reg Redaro velomobile design in 2001. It used a front wheel drive design and rear steering. With standard bicycle gearing,I found the machine to be on the slow sie mainly due to the use of 20″ drive wheel. I would find tht a more common up-right bike (any design type) is more practical then a velomobile due the structures presently in place in most citys. There is really no structures in place ight now due to the rarity of the velo design. Given time, the velo will make a great alterative to the open up-right and reumbentbike designs. What is needed so push of the velo design in the main stream to showcase it urban cycling mode. The price will have to come down to make it worth while to the mass market.

Reply
Amoeba

January 15, 2013

One of the factors that makes cars and driving artificially inexpensive, are the hidden subsidies to car drivers. This is the consequence of external costs that are not charged to the motorist, but shared-out among the population.
In the UK each registered car is subsidised on average to the extent of just over 2000 Euro per year, or over 20000 Euro per decade. (2008 figures). Ref.

It is common for motorists to maintain incorrectly that the vehicle-tax and fuel duty that they pay ‘subsidises’ cyclists and other road users. This is untrue, in-fact, the reverse is often true. There are numerous externalities of motor-vehicle use: air-pollution, noise pollution, deaths and morbidity arising; diseases of inactivity (from creating a hostile road environment that deters active transport); etc.

Like anything that is artificially under-priced, there is an excessive demand with frivolous and unnecessary driving is encouraged. People have apparently lost the ability to walk further than a few tens of metres.

If motorists were to be charged the full cost of these externalities, charges would necessarily need to be levied on mileage and fuel, probably with a time-of-day component, to iron-out congestion peaks.
Driving would become less popular, while walking, velomobiles, cycling and Public transport would become increasingly attractive and with less motoring, the world would be a less-congested, safer, quieter less polluted and healthier place.

Ref.
The True Costs of Automobility: External Costs of Cars
Overview on existing estimates in EU-27
Final Report
TU Dresden
Chair of Transport Ecology
Prof. Dr. Ing. Udo J. Becker
Thilo Becker
Julia Gerlach
Dresden, October 12th, 2012
http://tinyurl.com/c67dwq3

Reply
Amoeba

January 15, 2013

Looks really nice, of course, I’d like to see one in the flesh. But since I’m considering a VM, I’m potentially interested.
But it looks too hot, for warm weather use.

Reply
Christophe

January 21, 2013

Ride in a Velomobile make sweating a lot. Don’t forget that !

Reply
Sylvain

January 27, 2013

Hi Arnold

When you say “We aim for 55 km/hour at 150 w. 150 watt “, could you explain us the way you defined the required power to ride at this speed ? I assume this is directly linked to the aerodynamics of your Tilt VM. Is this required power based on calculation or testing on a prototype ?
Thank you
Sylvain

Reply
hossam

May 25, 2015

is it available for sale or what
if so how much do i have to pay for

Reply
Bike-car designs | iBikes.ro

June 2, 2015

[…] 55km/h with 150w of power https://bicycledesign.net/2012/10/velotilt-design-of-a-low-drag-practical-velomobile […]

Reply
velomobiles – 100% more range than bicycles by better aerodynamics | www.iBikes.ro

June 28, 2015

[…] https://bicycledesign.net/2012/10/velotilt-design-of-a-low-drag-practical-velomobile/ The development team consists of Will Schermer- the idea and funding guy, David Weilemaker- design and aerodynamics, George-emile Tokaya- design and ergonomics, Bram Smit- FFWD, design and construction, Jan Reus- composites, and Arnold Ligtvoet- commercial development. Wielemaker and Tokaya are both members of the Delft Technical University HPT team and were designers of the Velox2, which reached a speed of 129.6 Km/h (80.1 mph) at Battle Mountain, NV, so a lot of what they learned from that experience is going into this project. […]

Reply
velomobiles – 100% more range than bicycles by better aerodynamics | www.iBikes.ro

June 28, 2015

[…] The development team of VeloTilt consists of Will Schermer- the idea and funding guy, David Weilemaker- design and aerodynamics, George-emile Tokaya- design and ergonomics, Bram Smit- FFWD, design and construction, Jan Reus- composites, and Arnold Ligtvoet- commercial development. Wielemaker and Tokaya are both members of the Delft Technical University HPT team and were designers of the Velox2, which reached a speed of 129.6 Km/h (80.1 mph) at Battle Mountain, NV, so a lot of what they learned from that experience is going into this project. In a presentation the team pointed out a few issues with current velomobiles: Not always easy to enter and exit, Fall over when cornering too fast, Limited cargo space, Not easy to maintain, Require a large storage area. So they also outlined the design goals for the VeloTilt project: Tilting for safe cornering and fun to ride, Easy entrance, Usable for people from 1.6 to 2 meter ( roughly 5’ 4” to 6’ 7”), 70 liters of luggage space, Excellent braking, Speed 55km/h with 150 watts of power, All technical parts easily accessible, Storage in .8 x 1 meter space. […]

Reply
paul

October 31, 2017

Have they started commercial production, if so at what price delivered in the UK. Has anyone in the UK got a sales demonstrator. I’d guess they’d be too hot for summer use south of the middle of the EU irrespective of the ventilation system. However, they look perfect for dark wet winter days and nights. What surfaces can they be used on. Some tar spray and chippings surfaces in the UK are harder on cycles than a soft damp dirt track.

Reply
paul (again)

February 2, 2018

Has this project died? Hello! Can you hear me? … Pity. Looked dry and warm with active living suspension but I guess its just a dead duck.

Reply
jiro

January 4, 2024

Paul (again), this group stopped work on this design. I believe they were unhappy with the aerodynamics and were unable to meet their speed/energy goals. So, they gave the male plug to an American in North Carolina who is developing it, but rather slowly I believe. You can find Velo tilt on Facebook.

Reply